Lab Guide 1 - Multi-vendor

1. Troubleshooting Scenario

1.1. Troubleshooting Config Deviation

Let’s simulate a manual configuration change on one of the devices.

  1. Go to the CloudLabs portal, and toggle on Insert a Configuration Change.

    portal_insert_config_change

  2. Return to the dashboard. In about a minute, an anomaly appears in the Deployment Status section of the dashboard.

  3. Click the anomaly to go to the Anomalies view.

    active_anomalies_330.png

  4. Click spine2 to go to the telemetry view for spine2. Any anomalies are listed.

    spine2_telemetry_330.png

  5. Click the Config tab to see details about the anomaly. Scroll down to see the deviation.

    config_dev_details_330.png

    config_dev_actual_330.png

  6. After you’ve identified the problem, you can restore the original config by returning to the CloudLabs portal and toggling off Insert a Configuration Change. You can also click Apply Full Config in the Apstra UI to revert the device to the golden configuration

Milestone 4

When you have identified the problems in the network you have completed the lab.

Congratulations!