Lab Guide 1 - Juniper

Rack Type Construction

Rack Types are modular definitions containing top-of-rack switches, workloads, and their associated connections. There are also redundancy protocol settings and other details contained. The racks we are about to build will be used in the next stages of modelling our lab fabric. Like the other building blocks we will work with, there are several pre-defined examples that come with the server. You can examine them in the list to get a feel for the possibilities. They can all be easily cloned and modified to give us the exact characteristics we need to architect our fabric.

We are going to create brand new ones in this exercise, though. This will show how easy it is to model our racks. Once we have done so, they can be used repeatedly, allowing tweaks, as needed. The lab example has two rack types: one with dual-switches and one with a single switch.

Apstra version 4.2.0 introduces the Rack Designer. It offers a new workflow that allows drag-and-drop functionality, eliminates menu-diving and reduces required mouse-clicks. This exercise also shows that server workloads can be defined at this stage of construction. Of course additions can be made once the Blueprint is in operation. In fact, we can add and remove servers whenever we need.

The traditional Rack Builder remains accessible for users that are accustomed to its use. This exercise is performed with the Rack Designer tool. If you have not used it, feel free to open the Rack Builder, if you are curious about how it compares.

Create Single-Homed Rack Type

  1. Navigate to Design > Rack Types and click *Create in Designer

    rack_design-42.png

  2. In the Summary section, enter/select values as shown in the table below.

    Table 1. Table Single-Homed Rack Type Settings
    Summary Value

    Name

    apstra-single

    Fabric connectivity design

    L3 Clos

  3. In the menu at the bottom of the view, click the leaf icon to add a single leaf node to this rack. With this node hi-lighted, select the wrench icon to reveal the node’s properties view. This view can also be activated by clicking the gear icon above the node. Match the settings for this node as shown in the table below. Leave the other settings in their default state.

    Table 2. Table Single-Homed Rack Type Leafs Values
    Leafs Values

    Name

    apstra-single

    Logical Device

    virtual-7x10-1

    Links per spine

    1

    Add single leaf

  4. Click the Add Generic icon to add a generic system to the rack. After the Generic System appears, click the wrench icon to reveal the properties view for this selected node. As with the leaf, this view can also be activated by clicking the gear icon above the node. Match the settings shown in the table below. Leave the other settings in their default state.

    Table 3. Single-Homed Generic System Values
    Server Values

    Name

    single-server

    Logical Device

    AOS-1x10-1

    Add single generic

  5. Click and drag your mouse to select the switch node and the new generic - both will appear inside dashed boxes. Click the chain icon to reveal the Links Groups: view. Ensure the count value is 1 and click Create.

    Table 4. Generic System Link Values
    Link Values

    Label

    single-link (or use the default value)

    Count

    1

    Single server link

  6. A new view will appear where you modify the link label or you can leave the default value. Don’t modify any of the other values. We will use those in the next exercise. When your view looks like the view below, click Create and the Rack Type will be created and you will return to the list view. Single server link 2

  7. To see the details of the rack you’ve just created, click its name in the list. It should appear like the image below.

Single rack complete

Let’s proceed to the next rack we will need for our fabric.

Create Dual-Homed Rack Type

Frequently, data centers provide redundancy for workload devices in the form of dual top-of-rack switches. Apstra provides great flexibility in rack design, so we will configure this rack with redundant switches.

  1. From within Design> Rack Types, click Create in Designer.

  2. In the Summary section, enter/select values as shown in the table below.

    Table 5. Dual-Homed Rack Type Summary Values
    Summary Value

    Name

    apstra-esi

    Fabric connectivity design

    L3 Clos

  3. In the bottom menu, click the leaf icon to add a leaf node to this rack. As before, with this node hi-lighted, select the wrench icon to reveal the node’s properties view. The gear icon above the node also works. Match the settings for this leaf as shown in the table. This time, we will set the redundancy protocol to ESI because this lab uses Juniper devices. Notice when you do this, something cool happens and redundant leaf automatically appears in the view. Make sure both switches have all settings specified.

    Table 6. Dual-Homed Rack Type Leafs Values
    Leafs Value

    Label

    apstra-esi

    Logical Device

    virtual-7x10-1

    Links per spine

    1

    Redundancy Protocol

    esi

    ESI dual leafs

  4. We are going to add three servers and their links to this RT. For the first one, click Add Generic icon in the menu bar. As before, click the wrench icon to open the properties view. Match the property settings to the table values.

    Table 7. Dual-Server Values
    Parameter Values

    Label

    dual-server

    Logical Device

    AOS-2x10-1

    Dual server links

  5. Let’s add dual links to this server. Click and drag to select the generic and both leafs. In the view that appears, we will make the appropriate settings, as in the table.

    Table 8. Dual-Server Links Group Values 1
    Parameter Values

    Count

    1

    Peer Switch

    First and Second are checked

    Dual server links 1

  6. Click Create and the next view will appear. Peer switch selections appear on both pages.

    Table 9. Dual-Server Links Group Values 2
    Parameter Values

    Count

    1

    Peer Switch

    First and Second are checked

    Lag Mode

    LACP Active

    Dual server links 2

  7. Now, we will add the first single connected server to this RT. Click the Add Generic icon (we are getting good at this, by now).

    Table 10. Add Single-Server 1
    Parameter Values

    Label

    single-server-1

    Logical Device

    AOS-1x10-1

    single-server-1

  8. This device requires a single link to switch 1. Click and drag to select the first switch and this server. You may need to drag the dual-server over a bit to make it easier to select those two devices. The drag box only has to touch the two devices to select them. Match the parameters as shown.

    Table 11. Single-Server Links Group Values 1
    Parameter Value

    Count

    1

    Peer Switch

    First

    single-server-1 links1

  9. Click the Create button (not the one on the far right) to open the next view.

    Table 12. Single-Server Links Group Values 2
    Parameter Value

    Count

    1

    Peer Switch

    First

    LAG Mode

    No LAG

    single-server-1 links2

  10. Let’s add the third server to this RT. This one with have a single link connected to (you guessed it) switch 2. Click the Add Generic icon. Go ahead and drag the new generic over to the right for a cleaner look.

    Table 13. Add Single-Server 2
    Parameter Values

    Label

    single-server-2

    Logical Device

    AOS-1x10-1

    single-server-2

  11. This device requires a single link to switch 2. Click and drag to select the second switch and this server. Click the Link icon and match the parameters in the table.

    Table 14. Single-Server 2 Links Group Values 1
    Parameter Value

    Count

    1

    Peer Switch

    Second

    single-server-2 links1

  12. Click the Create button (the close-by one) to open the next view.

    Table 15. Single-Server 2 Links Group Values 2
    Parameter Value

    Count

    1

    Peer Switch

    Second

    LAG Mode

    No LAG

    single-server-2 links2

  13. At last, we are ready to click the Create button on the lower right and return to the Rack Types list. You can see the racks you have created at the top of this list. Click apstra-esi to see what you have built.

esi_rack-dual_completed.png